Author Topic: kickoff tee question  (Read 5696 times)

0 Members and 1 Guest are viewing this topic.

coachschey

  • Guest
kickoff tee question
« on: June 17, 2014, 12:51:02 PM »
Hello all I am a coach and a teacher and I am currently training to teach an engineering class to high school students and our project is to redesign a kicking tee and was wondering if you could help me with the rules about the tee. thanks!

younggun

  • Guest
Re: kickoff tee question
« Reply #1 on: June 17, 2014, 05:00:37 PM »
High School Rules: A kicking tee shall be made of pliable material which elevates the
lowest point of the ball no more than 2 inches above the ground.

coachschey

  • Guest
Re: kickoff tee question
« Reply #2 on: June 17, 2014, 07:55:46 PM »
Thanks so much for responding so fast. I did find this on another site later in the day. I did wonder if any of you have seen really odd ball kicking tee. from that rule almost anything will do. right!!!

thanks again I have been coming here and reading for a couple of years I always love to read what you guys think of us coaches.

 

Offline HLinNC

  • *
  • Posts: 3491
  • FAN REACTION: +133/-24
Re: kickoff tee question
« Reply #3 on: June 17, 2014, 08:43:32 PM »
The Jan Stenerud model


The "standard" model


The "donut"- most of these I have seen leave the orange doohickey off and they are usually wrapped in athletic tape.


Offline Osric Pureheart

  • *
  • Posts: 592
  • FAN REACTION: +18/-7
  • 1373937 or 308?
Re: kickoff tee question
« Reply #4 on: June 18, 2014, 04:57:14 AM »
You may be interested in these things, which are quite common in rugby (particularly Rugby League) and unheard of most anywhere else.  They're designed to hold the ball at an angle rather than pointing straight up, and they're also adjustable for different kickers' preferences (there's no laws other than biomechanics about how high the ball can be off the ground).

Also this style, as popularised by All Black Dan Carter, which is made of flexible rubber rather than hard plastic.
« Last Edit: June 18, 2014, 05:01:24 AM by Osric Pureheart »